Issue link: https://www.ascpskindeepdigital.com/i/1531085
Protect your practice with the gold standard in liability coverage at ascpskincare.com 83 Step 5 Use the Elleebana Precision Lifter Tool to scoop a small quantity of lashes in the hooked section of the lifter tool and slowly but firmly lift, roll, and wrap the lashes from the base up and around the silicone rod. Before releasing your lifted section, momentarily hold the lashes in place. If you raise the lashes up and over the rod or shield before the adhesive is tacky, you will wipe off or scrape away the adhesive and the lashes won't hold in place. Step 7 After the lotion has processed, dry wipe it off using a cotton swab or micro brush, being careful not to disrupt the location of the lashes along the silicone rod. Re-lift any disturbed lashes by using additional adhesive. Do not cross-contaminate the adhesive by touching the brush from your adhesive to the client's lashes. Step 8 In a mixing bowl, combine Elleeplex Step 2 Setting Lotion with Elleeplex Re- GEN Next Gen in an 8-to-1 ratio. Apply the mixture to the lashes with a clean application brush, allowing the Re-GEN Next Gen to provide nourishing and hydrating properties to the lash. This is the true benefit of combining the Re-GEN Next Gen with Step 2 Setting Lotion—the lashes will be nourished and you save time. Step 6 Open Step 1 Lamination Lotion of the Elleeplex Lash Lamination System and dispense into a tray, bowl, glue ring, or mixing dish. The lotions required during the lash lamination treatment are a thick consistency to minimize the possibility of the products running into the eyes. Use an application brush to paint Step 1 Lamination Lotion from the base of the lashes to ¾ of the way up the lash. For a more dramatic lift, coat most of the lash. ESTY PROTOCOL EVER WONDERED HOW ELLEEBANA HYBRID SHIELDS COMPARE TO ELLEEBANA FLEX RODS AND FLEX SHIELDS?